Skip to content
Metal Roofing by Orange Exteriors, serving Buffalo, MN

Buffalo, Minnesota

Practical Metal Roofing in Buffalo, MN

On a September afternoon when wind out of the northwest drags whitecaps across Buffalo Lake, rain does not fall on a roof here so much as it gets driven sideways into the gable ends of the lakeshore homes ringing Buffalo, Minnesota, where the 1856 townsite plat around the Wright County courthouse gives way at its edges to homes close enough to the water to catch that fetch off Buffalo Lake and Lake Pulaski.

Get your estimate today

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.

  • Licensed and insuredMinnesota exterior contractor
  • 5.0 from 217 reviewsVerified on Google
  • Storm and insurance workWe handle the claim with you
  • Faith-based, locally ownedRefreshingly honest

Reading a Buffalo roof before the panels get ordered

A crew that has priced standing seam on both sides of town treats a Sturges Park bungalow and a Lake Pulaski walkout as two different jobs. The bungalow sits on a simple gable close to the courthouse era grid, so panel runs stay long and the labor is mostly measuring twice. The lakeshore lot is the harder estimate: dormers, porches and a walkout roofline chopped up to frame the water view mean more valleys, more transitions and more hemmed edges, and every one of those seams is where a fastener or a soldered pan has to be done right instead of fast. We price that complexity honestly rather than rounding a lake home down to a townsite number, the same discipline we bring to our luxury roofing work on Wright County's more architecturally layered homes.

Residential exterior work by Orange Exteriors, roofing contractor serving Buffalo, MN

Metal Roofing in Buffalo

What a standing seam roof changes for a Buffalo address

  • Fewer ice dams above lakeside walkouts

    Standing seam's slick panel surface sheds snow before it compacts on the long, low pitched runs common on newer Lake Pulaski walkouts, cutting the days meltwater sits and backs up under starter courses.

  • Gable ends that shed sideways lake rain

    The raised, interlocking seam profile resists the wind driven rain that the fetch across Buffalo Lake and Lake Pulaski throws at gable ends, so lakeside walls stay dry through a fall northwester.

  • No added strain on your shoreland allowance

    A standing seam reroof follows the existing footprint, so it does not chip away at the 25 percent impervious cap Buffalo enforces on Buffalo Lake and Lake Pulaski lots the way a deck or addition would.

  • Years of exposure before it needs attention

    Standing seam's fastening and coatings hold up through repeated seasons of open water wind without the granule loss or curling edges that shingles show first near Buffalo Lake and Lake Pulaski.

  • A roofline that reads as one plane

    From a dock on Buffalo Lake or Lake Pulaski, long standing seam panel runs read as a single plane instead of dozens of shingle tabs, an outcome lakeshore owners notice every time they look back at the house.

  • Less debris catching in Sturges Park's valleys

    Standing seam sheds needles and leaves off steep runs rather than trapping them the way shingle valleys do, cutting the granule clogged gutters common under Sturges Park's mature tree canopy.

How we handle metal roofing jobs around Buffalo

  • We measure lakeshore and townsite roofs separately

    Our estimator walks a Sturges Park bungalow and a Lake Pulaski walkout as two different jobs, counting valleys and hips on site instead of quoting a flat rate off a satellite photo, because the two use very different amounts of panel and trim.

  • We check the shoreland overlay before crews arrive

    We confirm whether a project needs a shoreland permit before scheduling work, since Buffalo's overlay on Buffalo Lake and Lake Pulaski caps impervious cover and requires a permit for decks, additions and other structures, so owners are not caught off guard mid job.

  • A family crew based just down the road in Eden Prairie

    We are family run and faith based, licensed and insured, and we send the same estimator who scoped the job to walk the site, not a rotating call center reading a script to Buffalo homeowners.

  • We document storm damage the way adjusters expect

    After a hail or wind event tracks through Wright County, we photograph and log the specific panels, flashing and fasteners affected, building a claim file that holds up when a Buffalo homeowner's insurer reviews it.

  • Estimates scheduled around lake season traffic

    Because summer traffic toward Monticello, St. Michael and Albertville can slow a weekday visit, we offer free, no obligation estimates any hour, every day of the week, backed by a 5.0 rating across 217 Google reviews Buffalo homeowners can check themselves.

Metal Roofing by Orange Exteriors, serving Buffalo, MN

What people near Buffalo say

  • Orange Exteriors did an excellent job with my new roofing install. Very professional, on time and hard working crew. Completed the job in one day.
    Dick JohnsonRoof installation
  • We live in Eden Prairie. Orange did an excellent job on our siding replacement and provided great customer service all the way through.
    Thomas DeSutterSiding replacement, Eden Prairie, MN
  • Fantastic guys to work with, did an excellent job of fixing our siding. You can tell it’s a high integrity company. Definitely recommend.
    Carolyn MillerSiding repair

Buffalo metal roofing questions we field most

What people in Buffalo ask us about this work. If yours is not covered, call and ask.

Is snow load or hail the bigger reason Buffalo homeowners choose standing seam?

It depends on which side of town the house sits on. Lakeshore homes on Buffalo Lake and Lake Pulaski, catching open wind off the water, lean on standing seam's wind and rain performance, while homes on more open ground toward Monticello and St. Michael tend to get argued on hail resistance and clean snow shedding off long panel runs.

Does a complicated Lake Pulaski roofline make a standing seam job cost more?

Yes, and here is why: dormers, porches and walkout roof breaks multiply valleys, hips and cut panels, and each one needs its own flashing and hand work. A chopped up lakeshore roofline on Buffalo Lake or Lake Pulaski simply takes longer to install correctly than a simple gable near the courthouse era grid downtown.

Can you install standing seam over our existing roof deck in Buffalo, or do you tear off first?

It depends on the deck's condition. On courthouse grid homes with a sound plywood deck we can install standing seam over one layer of asphalt shingles with the right underlayment. On lakeshore homes exposed to wind driven rain off Buffalo Lake and Lake Pulaski, we generally recommend a full tear off so we can check for trapped moisture first.

Get a Buffalo standing seam estimate before the next lake storm

Whether your address sits inside the original townsite plat or out along Buffalo Lake or Lake Pulaski, we will walk the roofline, account for the shoreland permit if your project needs one, and give you a free, no obligation estimate for standing seam metal, available any hour, any day.

Get Your Free Exterior Estimate

Tell us what is going on with your roof, siding, windows, or gutters. We will take a look and give you a straight answer, including when the answer is that you can wait.

Request your estimate

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.