Skip to content
Custom Metal and Steel Buildings by Orange Exteriors, serving Cottage Grove, MN

Cottage Grove, Minnesota

Quality Custom Metal and Steel Buildings in Cottage Grove, MN

Ag ground, contractor yards and river bluff still take up a good share of Cottage Grove, which is why steel buildings here are usually working structures: machine storage, a shop off a gravel drive, a replacement for something the wind took. Open Mississippi bluff wind is the load that decides the frame, and the August 2024 storm showed which of the older structures were anchored and which were not.

Get your estimate today

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.

  • Licensed and insuredMinnesota exterior contractor
  • 5.0 from 217 reviewsVerified on Google
  • Storm and insurance workWe handle the claim with you
  • Faith-based, locally ownedRefreshingly honest

River bluff wind sets the frame here

Cottage Grove has more land along the Mississippi than any other city in Minnesota, and that shows up in the work. Sites sit open, often on old field or bluff edge, and the wind arrives with nothing to slow it. On the storm calls after August 29, 2024, the buildings that came apart were rarely the ones with bad steel. They were the ones with light anchorage, screws backed out of the wall panels, and doors that let pressure inside. We size the anchor bolts and the base connection first, then the door and window openings, because an overhead door that fails turns a wind load into an uplift problem on the whole roof. On smaller yards where a full custom frame is more building than the job needs, we will point you at prefabricated buildings, which cover a lot of the storage work east of town without a custom drawing set.

Residential exterior work by Orange Exteriors, roofing contractor serving Cottage Grove, MN

Custom Metal and Steel Buildings in Cottage Grove

Why these buildings hold up in Cottage Grove

  • Eave and rake edges that hold

    Wind coming off the river bluff finds the edges first. We detail the eave, rake and gable trim with tighter fastener spacing there, because that is where a metal building starts to peel.

  • Overhead doors sized for the wind

    A door that blows in pressurizes the building and lifts the roof from inside. We spec the door and its track for the exposure, not just for the width of your loader.

  • Storm replacements written for insurance

    If the last structure came down, the claim moves faster with photographs taken before cleanup, measurements of what stood there, and a scope that separates wind damage from age. Storm and insurance work is regular work for us.

  • Clear span for equipment, not boxes

    Trailers, loaders and farm machinery need width with no columns down the middle and height at the opening. We set the span and eave height around the largest thing you will drive in.

  • Grade and drainage away from the slab

    Land running toward the Mississippi moves water fast. We set the pad above the surrounding grade and pitch the apron away from the walls, or the first spring melt finds the base trim.

  • Bracing you can still park against

    Open sidewalls mean the wind bracing has to go somewhere else. We move it into the end walls or use a portal frame so you can back a trailer against any bay without fighting a cross brace.

The way we handle storm rebuilds

  • We answer when the storm passes

    Our phones stay open all day and all night, every day of the week. After a night like August 29, 2024, that is exactly when owners are trying to find out what is still standing.

  • Damage documented for the adjuster

    We photograph and measure what failed before anything gets cleared, then write the scope in terms your insurer can work from. Storm and insurance work is a normal part of what we do.

  • Repair when repair is honest

    Not every damaged structure needs replacing. If the frame is sound and the trouble is sheeting and fasteners, we say so rather than selling you a whole new building.

  • We clear what came down

    A rebuild starts with removal. We take the twisted panels and bent purlins off the site so the new slab and frame are not going up around a pile of scrap.

  • Rated 5.0 across 217 reviews

    Our Google rating is 5.0 from 217 reviews. Read them before calling, especially the storm jobs, since that is when a contractor is easiest to judge.

Custom Metal and Steel Buildings by Orange Exteriors, serving Cottage Grove, MN

What people near Cottage Grove say

  • Orange Exteriors did an excellent job with my new roofing install. Very professional, on time and hard working crew. Completed the job in one day.
    Dick JohnsonRoof installation
  • We live in Eden Prairie. Orange did an excellent job on our siding replacement and provided great customer service all the way through.
    Thomas DeSutterSiding replacement, Eden Prairie, MN
  • Fantastic guys to work with, did an excellent job of fixing our siding. You can tell it’s a high integrity company. Definitely recommend.
    Carolyn MillerSiding repair

What Cottage Grove owners ask us

What people in Cottage Grove ask us about this work. If yours is not covered, call and ask.

A storm took my shed in Cottage Grove. Will insurance cover a steel replacement?

Often, if the damage is storm damage rather than age. What decides it is documentation: photographs taken before anything is cleared, measurements of what stood there, and a scope that separates wind damage from wear. We handle storm and insurance work and write it that way. Your policy language and your adjuster still govern the outcome.

How long does a metal building take to go up in Cottage Grove?

Erecting the frame is the short part. What sets the calendar is permit review, fabrication lead time on the steel, and concrete, since a slab needs cure time and ground warm enough to pour. Weather moves all of it. We give you the sequence at quoting and tell you which step is the long one instead of promising a date we do not control.

Can you build something big enough for a tractor and a trailer?

Yes, and it is worth measuring before we draw. Clear span width, eave height and door opening get set around the largest machine you will drive in, plus room to swing it. On this open ground we also check the door for wind pressure, because a door that fails in a gust takes the roof with it.

Rebuilding after the storm in Cottage Grove

Whether the last structure blew apart or you are adding one, we will walk the site, photograph what is there for your insurer, and quote the steel in writing. Calls answered any hour.

Get Your Free Exterior Estimate

Tell us what is going on with your roof, siding, windows, or gutters. We will take a look and give you a straight answer, including when the answer is that you can wait.

Request your estimate

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.