Plymouth, Minnesota
Straightforward Custom Metal and Steel Buildings in Plymouth, MN
Very little open farmland is left in Plymouth, so the steel buildings we put up here go behind businesses along the Wayzata Boulevard corridor or on the larger wooded lots near Bass Lake and Medicine Lake. Trees, wetland buffers and setbacks usually decide the footprint before anyone picks a width, and the site work is usually the harder half of the job.
Get your estimate today
Rated 5.0 from 217 Google reviews
- Licensed and insuredMinnesota exterior contractor
- 5.0 from 217 reviewsVerified on Google
- Storm and insurance workWe handle the claim with you
- Faith-based, locally ownedRefreshingly honest
Trees, wetlands and setbacks shape the footprint
Site plan first, building second. On a wooded Plymouth lot the questions are where the drive comes in, how far the wetland buffer pushes the pad, and whether the grade needs fill before a slab goes down. Once the shell is up, the trees keep working on it: needles and leaves collect where a lower roof meets a wall, and standing water at that junction rots out the trim long before anything happens to the steel. We detail those transitions with real flashing and we put gutters where runoff would otherwise cut a trench beside the foundation. Screening and finish also come up, because a shop next to a flex building has to look like it belongs. For a plain storage shell on a clean pad, prefabricated buildings can be the sensible choice, and we will say so.
Custom Metal and Steel Buildings in Plymouth
Details that matter on a wooded lot
Footprint that respects the buffer
Wetland edges, tree preservation and setbacks decide where a building can sit long before the width matters. We check those first so the design is not redrawn after the city looks at it.
Flashing at every roof to wall change
Lower roofs meeting taller walls are where these buildings leak. Counterflashing done properly, cut into the wall where it belongs, is the difference between a dry corner and rotted trim.
Gutters sized for leaf load
Wooded lots drop needles and leaves onto everything. Undersized gutters clog, overflow and dump water at the foundation, so we size and place them for what the trees around your site actually shed.
Room to turn a truck
A building you cannot back a trailer into is a smaller building than you thought you were getting. Door placement, apron width and turning radius get worked out with the site plan.
Pad and drainage before steel
On a wooded lot the grading is the real job. We get the pad built, compacted and draining away from the slab before a single frame section shows up on site.
Insulated shells for winter work
If you plan to run heat inside, the insulation and vapor detail has to be right or you get condensation dripping off the underside of the deck in January.
Working with you from site plan to shell
Site walk before design
We come out, look at the trees, the grade and where water goes after a storm, then design around what is there instead of assuming a flat clear pad.
We handle the city conversation
Plans, setbacks, buffers and screening questions go through us. You should not have to learn the ordinance to get a storage building approved.
Finishes matched to what you own
Color, trim and roof profile can be chosen to sit quietly beside an existing office or house rather than announcing itself from the road.
Sitework listed line by line
Clearing, grading, fill and the apron are written into the estimate, because that is the part that quietly grows when it is left vague.
Straight talk about scale
Most Plymouth land is spoken for and many of these jobs are modest. If a lean-to addition or a smaller shell does what you need, we will say so.
What people near Plymouth say
Fantastic guys to work with, did an excellent job of fixing our siding. You can tell it’s a high integrity company. Definitely recommend.
Carolyn MillerSiding repair The crew arrived early and spread tarps all around the house to capture every bit of debris. By 3:00 PM, my entire roof was completely finished.
Hazel JamesRoof replacement, Minneapolis, MN Orange Exteriors fixed a minor leak that involved replacing flashing and a few shingles blown off our roof. Timely, quality work. Great ideas to keep our roof going long term.
Jim ThomasStorm damage repair
Plymouth permits, trees and finishes
What people in Plymouth ask us about this work. If yours is not covered, call and ask.
Do I need a permit for a steel storage building in Plymouth?
For anything of real size, yes, and the review usually asks about more than the building itself. Expect setbacks, wetland buffer, drainage and often screening or finish requirements to come up. Stamped structural drawings are part of the package. We put that together and answer the comments that come back from review.
Will a metal shop look out of place beside my Plymouth office?
It does not have to. Panel profile, color, trim and a bit of masonry or matching siding at the front can make a steel building read as part of the same property. Where a business park carries appearance standards, those choices are not optional anyway, so we design to them from the start.
Why do metal buildings under trees fail first at the valleys?
Because debris sits there and holds water. Needles and leaves pack into valleys and roof to wall junctions, water backs up under the panel lap, and the trim and fasteners go long before the panel does. Keeping those spots clear each fall does more for the building than anything else you can do.
Start with a walk of the site
Show us the lot, the trees and where you want the door to face. We will tell you what fits inside the setbacks and buffer, then put a free estimate together.
Get Your Free Exterior Estimate
Tell us what is going on with your roof, siding, windows, or gutters. We will take a look and give you a straight answer, including when the answer is that you can wait.
- Phone(612) 600-8529
- Emailadmin@orange-exteriors.com
- Office6600 City West Pkwy Suite 375, Eden Prairie, MN 55344
- HoursOpen 24 hours, Sunday to Saturday
Request your estimate
Rated 5.0 from 217 Google reviews