Bloomington, Minnesota
Expert Metal Roofing in Bloomington, MN
The roof on a 1950s rambler in Bloomington is usually one long, low plane, and low slope is what decides everything else. Snow sits up there for months rather than sliding off, so the roof carries the load instead of shedding it. That rules out some metal systems outright and makes a mechanically seamed panel the sensible one.
Get your estimate today
Rated 5.0 from 217 Google reviews
- Licensed and insuredMinnesota exterior contractor
- 5.0 from 217 reviewsVerified on Google
- Storm and insurance workWe handle the claim with you
- Faith-based, locally ownedRefreshingly honest
Low slope decides which panel goes on
Pitch is the first measurement we take in Oxboro or West Bloomington, because below a certain slope a snap-lock panel is not appropriate and an exposed fastener panel never was. A mechanically seamed profile with sealant in the seam is what belongs on these roofs. The good news is that a rambler gives you the ideal shape for metal: long unbroken planes, panels running eave to ridge in one piece, no end laps to leak. Then comes the tear-off, and it is usually bigger than expected. Two layers of shingles is common here, sometimes with a deck underneath that has been carrying that weight for decades. Split-levels add a wrinkle where the upper plane dumps onto the lower one. If a heavier, more architectural look is what you had in mind, our luxury roofing covers the profiles that go beyond a standard seam.
Metal Roofing in Bloomington
What a seamed panel gives a rambler roof
Seamed, not snapped together
On a low pitch the seam has to be mechanically rolled closed with sealant inside it. That is the difference between a metal roof that works at this slope and one that weeps at every seam.
Panels that run eave to ridge
A rambler plane is long and unbroken, which is exactly what this system wants. One panel top to bottom means no end laps sitting in the middle of a run where snow melt pools.
Snow can sit without leaking
Nothing penetrates the panel face, so months of standing snow are a load question rather than a leak question. Fasteners are hidden under the seam where water never reaches them.
Clips that let panels move
A long run expands and contracts a real amount between January and July. Floating clips let the panel slide instead of tearing at its fastenings, which matters more on these lengths than on a small roof.
A flat look across wide planes
Wide flat pans on a long plane show every ripple in afternoon light. A narrower pan and a proper backer keep a Bloomington rambler roof reading as a clean surface instead of a wavy one.
Both old layers come off
Metal goes over a clean deck, never over two courses of brittle shingles. Pulling both layers also shows us what the deck has been doing under all that weight, which is worth knowing.
Working on a rambler, start to finish
We measure the pitch first
Slope decides whether a metal roof is even a good idea on your house. We take that number before talking about panels, and if it rules metal out, we say so.
We quote the tear-off honestly
We lift a corner at the eave to count layers before writing anything down. Assuming one layer and finding two halfway through the morning is how homeowners end up with a changed number.
We seam and check every run
The seamer goes down each run and then we walk it back, because on a low slope an unclosed foot of seam is not a cosmetic problem, it is the leak.
We field measure after tear-off
Panels are cut to the length of the plane, so we confirm that length on the exposed deck rather than trusting a number taken from the ground over old shingles.
Our estimates list the scope
What gets removed, how deck repair is handled, which flashings are new: it is written down before you decide. Estimates are free and we do not chase you afterward.
What people near Bloomington say
From sales to construction crew to upper management, they helped make an insurance battle a breeze. This is the best contractor interaction I have ever had.
Jim NormanRoof replacement Orange Exteriors did an excellent job with my new roofing install. Very professional, on time and hard working crew. Completed the job in one day.
Dick JohnsonRoof installation We live in Eden Prairie. Orange did an excellent job on our siding replacement and provided great customer service all the way through.
Thomas DeSutterSiding replacement, Eden Prairie, MN
Bloomington metal roof questions
What people in Bloomington ask us about this work. If yours is not covered, call and ask.
Is my Bloomington rambler too low a pitch for a metal roof?
Probably not, but the system has to match the slope. Snap-lock and exposed fastener panels have a minimum pitch and most ramblers sit under it. A mechanically seamed panel with sealed seams goes lower. We measure the actual slope on your roof rather than guessing from the curb, then tell you which of those it can take.
Why is the tear-off bigger than I expected on a split-level?
Because a lot of these houses have been roofed over twice. Two layers means more weight to carry down, a bigger dumpster and more time before the deck is even visible. Split-levels also have two roof heights and a wall between them, so there is flashing work at that junction that a single-plane house does not have.
How much snow can a low pitch rambler roof hold?
The framing was designed for a snow load, and steel weighs less than the two layers of asphalt coming off, so the covering itself is not what changes the arithmetic. What changes is behavior. At this pitch snow softens and creeps rather than letting go, so it stays up there through the winter instead of leaving in stages. On a split-level the part we watch is the upper plane, since anything that does release lands on the lower roof and the gutters under it.
Talk to us about a Bloomington metal roof
We will measure the pitch, count the layers at the eave and tell you honestly whether standing seam suits your rambler. The estimate is free and there is nothing to sign.
Get Your Free Exterior Estimate
Tell us what is going on with your roof, siding, windows, or gutters. We will take a look and give you a straight answer, including when the answer is that you can wait.
- Phone(612) 600-8529
- Emailadmin@orange-exteriors.com
- Office6600 City West Pkwy Suite 375, Eden Prairie, MN 55344
- HoursOpen 24 hours, Sunday to Saturday
Request your estimate
Rated 5.0 from 217 Google reviews