Skip to content
Custom Metal and Steel Buildings by Orange Exteriors, serving Bloomington, MN

Bloomington, Minnesota

Detailed Custom Metal and Steel Buildings in Bloomington, MN

Most of the metal building work we do in Bloomington lands on the commercial strips: a service bay off Oxboro, storage behind an office in the Penn American District, an equipment building on a west Bloomington yard. The land here is largely spoken for, so more of these projects are additions and replacements than open-field builds, and the existing building next door usually sets the terms.

Get your estimate today

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.

  • Licensed and insuredMinnesota exterior contractor
  • 5.0 from 217 reviewsVerified on Google
  • Storm and insurance workWe handle the claim with you
  • Faith-based, locally ownedRefreshingly honest

Drift, not snowfall, sizes the frame

Bloomington roofs already tell you the problem. The long low planes on buildings here hold snow instead of shedding it, and a new steel building put up beside a taller wall collects drift on top of that. Drift is what pushes purlin spacing and frame weight up, and it is the number people skip when they price a building by the square foot. We also find old slabs that were poured for something lighter, so a core test or a new footing goes into the scope early. Then there is the ground: the soils report, not the brochure, sets the anchor and footing design, and we would rather see it before quoting a frame. If the shell is simple and the site is clear, prefabricated buildings can cover a straightforward storage need without a custom frame.

Residential exterior work by Orange Exteriors, roofing contractor serving Bloomington, MN

Custom Metal and Steel Buildings in Bloomington

Built for snow that sits and does not slide

  • Drift load figured, not assumed

    A new building beside a taller wall collects drift on top of normal snow load. That number changes frame weight and purlin spacing, so it gets calculated before anything is ordered.

  • Low slopes that still drain

    Long unbroken planes hold water and snow instead of shedding them. We set slope, gutter size and valley detail so the roof drains where you want it to, not into a wall.

  • Old slabs checked before reuse

    Plenty of yards here have a slab poured for something lighter. We look at thickness, edge conditions and reinforcement before deciding whether it carries a new frame or gets a new perimeter footing.

  • Additions that keep you open

    Service bays and offices along Oxboro cannot shut down for a build. We phase the tie-in, keep the existing roof watertight and stage steel where your customers are not walking.

  • Clear span sized to your racking

    Interior columns look harmless on a drawing and get in the way every day. We ask what you are storing and how you move it, then set the span so the layout inside actually works.

  • Screws and seams checked on older shells

    Fasteners back out and closure strips dry up on buildings that have stood a couple of decades. Retorquing and resealing before a leak starts is far less work than chasing water afterward.

What we do before the frame is ordered

  • Engineering ahead of the order

    Snow, drift and soil conditions get resolved on paper first. Ordering a frame and discovering the load case later is how these jobs go sideways.

  • One point of contact

    We are family run, so the person who walked your site is the person you call when a question comes up in the middle of the build.

  • Written scope, no moving target

    The estimate says what is included: footings, slab work, doors, gutters and trim. Free, no obligation, and we would rather over-explain the scope than surprise you.

  • We check what is already there

    Existing roof, existing wall, existing slab. Half the surprises on a Bloomington addition come from what the last contractor left behind, so we open things up before quoting.

  • We hand over a checklist

    When the building is done you get the simple list: which fasteners to check, when to clear drift off the low side, and what a failing closure strip looks like.

Custom Metal and Steel Buildings by Orange Exteriors, serving Bloomington, MN

What people near Bloomington say

  • Fantastic guys to work with, did an excellent job of fixing our siding. You can tell it’s a high integrity company. Definitely recommend.
    Carolyn MillerSiding repair
  • The crew arrived early and spread tarps all around the house to capture every bit of debris. By 3:00 PM, my entire roof was completely finished.
    Hazel JamesRoof replacement, Minneapolis, MN
  • Orange Exteriors fixed a minor leak that involved replacing flashing and a few shingles blown off our roof. Timely, quality work. Great ideas to keep our roof going long term.
    Jim ThomasStorm damage repair

Common questions from Bloomington owners

What people in Bloomington ask us about this work. If yours is not covered, call and ask.

Can I put a steel addition next to my existing Bloomington warehouse?

Usually yes, and the design changes because of it. A lower roof next to a taller wall catches drifting snow, so the new frame carries more load than a standalone building of the same size would. We also detail the tie-in wall and the drainage between the two roofs, which is where these additions leak if nobody thinks about it.

Is my existing slab strong enough to build a metal building on?

It depends on thickness, reinforcement and what the edges look like, and you cannot tell any of that from the surface. We core it or expose the perimeter to find out. Often the slab is fine as a floor but needs new footings at the column lines, which is a smaller job than a full replacement.

How much snow can a low slope metal roof in Bloomington hold?

As much as it was designed to hold, which is why the design load belongs on the drawings rather than in a conversation. The real issue is drift, not average snowfall: wind piles it against parapets, valleys and taller walls. If you see drift build in the same spot every winter, tell us where it sits.

Send us what you are trying to build

Tell us the footprint, what goes inside and what stands next to it. We will work out the load case and the foundation, then get you a free estimate with the scope written down.

Get Your Free Exterior Estimate

Tell us what is going on with your roof, siding, windows, or gutters. We will take a look and give you a straight answer, including when the answer is that you can wait.

Request your estimate

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.