Skip to content
Custom Metal and Steel Buildings by Orange Exteriors, serving Burnsville, MN

Burnsville, Minnesota

Straightforward Custom Metal and Steel Buildings in Burnsville, MN

Wind is the number that matters most on a steel building in Burnsville, which sits on the bluff above the south bank of the Minnesota River valley. Wind runs that open corridor and lifts hard at the eaves and corners of long, low buildings. Uplift is not a detail you add later. It decides the fastener pattern, the clips and the anchor bolts.

Get your estimate today

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.

  • Licensed and insuredMinnesota exterior contractor
  • 5.0 from 217 reviewsVerified on Google
  • Storm and insurance workWe handle the claim with you
  • Faith-based, locally ownedRefreshingly honest

Almost every steel building here replaces something

Burnsville ran out of open land in the late 1990s and has been redeveloping ever since, so a new steel building here usually starts with a teardown or a squeeze into a lot that already has a building on it. That changes the sequence. Demolition, existing utilities and the old slab come first, and what we find under that slab often decides the footing plan. Then there is the wind. Along the bluff the pressure at the corners and eave line runs well above the field of the wall, so the corner bays get tighter fastener spacing, heavier clips and anchor bolts sized for uplift rather than for weight. Skip that and the first thing to go is a trim piece, then the panel edge behind it. For simpler storage needs we also install prefabricated buildings on lots where a full build is more than the use justifies.

Residential exterior work by Orange Exteriors, roofing contractor serving Burnsville, MN

Custom Metal and Steel Buildings in Burnsville

What the river valley wind demands

  • Uplift detailing at the corner bays

    Wind off the Minnesota River corridor hits hardest at the corners and along the eave. Those bays get tighter fastener spacing and heavier clips than the middle of the wall, because that is where panels start to peel.

  • Anchor bolts sized to hold it down

    On a low, long building the load that matters is the one trying to lift the frame off the slab. Anchor bolts and base plates get designed for that, not just for the weight of the steel.

  • Demolition and slab work handled first

    Building on a redeveloped lot means dealing with what is already there. Old footings, an abandoned slab and buried utilities all turn up, and the footing plan gets adjusted once we can see them.

  • New skin over an existing frame

    Sometimes the frame is fine and the panels are done. Re-skinning the walls and roof of a sound existing building is often the right call on a redevelopment site, and we will say so if that is what we find.

  • Hail dented panels and insurance work

    Metal takes hail differently than shingles. Dents, seam damage and finish failure on an older panel system are worth documenting properly, and we handle storm and insurance work on commercial buildings.

  • Snow that blows instead of stacking

    Open wind on the bluff scours snow off some roof planes and piles it deep in the lee of parapets and equipment curbs. Unbalanced load like that gets designed for, not averaged out.

How we work on a redevelopment site

  • We plan the teardown too

    Removing what is there is part of the job, not a separate problem for later. We sequence demolition, site work and steel delivery so the lot is not tied up longer than it has to be.

  • Short drive from Eden Prairie

    We are based in Eden Prairie, so a site visit in Burnsville is a short trip rather than a scheduled expedition. That matters when something needs looking at before a pour.

  • Storm damage documented properly

    We do storm and insurance work, so if wind or hail has already hit an existing building on the site, we know what the adjuster needs to see and when to photograph it.

  • We keep the inspections in order

    Footing, slab and framing inspections all have to happen in sequence on a redevelopment site. We hold the schedule so the crew is not standing around waiting on a sign off.

  • Rated by the people we built for

    We are rated 5.0 from 217 Google reviews. On commercial work that comes from finishing on schedule and not leaving a punch list behind us.

Custom Metal and Steel Buildings by Orange Exteriors, serving Burnsville, MN

What people near Burnsville say

  • We live in Eden Prairie. Orange did an excellent job on our siding replacement and provided great customer service all the way through.
    Thomas DeSutterSiding replacement, Eden Prairie, MN
  • Fantastic guys to work with, did an excellent job of fixing our siding. You can tell it’s a high integrity company. Definitely recommend.
    Carolyn MillerSiding repair
  • The crew arrived early and spread tarps all around the house to capture every bit of debris. By 3:00 PM, my entire roof was completely finished.
    Hazel JamesRoof replacement, Minneapolis, MN

Burnsville steel building questions

What people in Burnsville ask us about this work. If yours is not covered, call and ask.

Do I need a wind rated design in Burnsville?

Every building gets designed for wind, but sitting on the bluff above the river valley makes the corner and eave zones the part to watch. Long, low roofs are exactly the shape wind lifts. In practice that shows up as heavier clips, closer fastener spacing at the edges and anchor bolts sized for uplift.

Can I replace an old steel building on the same slab?

Sometimes, and it is worth checking before you assume. The existing slab has to be thick enough, sound enough and located where the new anchor bolt pattern lands. We core it or at least expose an edge to see what is underneath. Often the slab stays and the perimeter footings get added or rebuilt.

Is there anywhere left in Burnsville to build new?

Not much raw land. The city filled in by the late 1990s and has been redeveloping since, so most new structures replace something or fill a corner of an existing site. That is workable, it just means demolition, utility locates and a closer look at parking and drive aisles before design starts.

Talk through a Burnsville site with us

Whether the lot is empty, occupied or holding a building past its life, we will look at it, talk through what the wind exposure means and put the numbers in writing.

Get Your Free Exterior Estimate

Tell us what is going on with your roof, siding, windows, or gutters. We will take a look and give you a straight answer, including when the answer is that you can wait.

Request your estimate

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.