Skip to content
Metal Roofing by Orange Exteriors, serving Norwood Young America, MN

Norwood Young America, Minnesota

Precise Metal Roofing in Norwood Young America, MN

Two planes, a ridge and nothing in the way: the farmhouse gables and postwar ranches in Norwood Young America give a metal crew the easiest roof shape there is. Long runs from peak to eave, few seams, little trim. What complicates the job here is not the roof, it is the wind that crosses open cropland with nothing standing between the fields and the gable end.

Get your estimate today

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.

  • Licensed and insuredMinnesota exterior contractor
  • 5.0 from 217 reviewsVerified on Google
  • Storm and insurance workWe handle the claim with you
  • Faith-based, locally ownedRefreshingly honest

A simple roof still hides two problems

Two planes and a ridge is the cheapest shape there is to cover in standing seam, because nearly all of the labor is in the panel and almost none of it is in the trim. What we watch for on the older houses is the deck. Farmhouse era sheathing is often one by boards with gaps between them, and a clip has to land in wood rather than in a gap, so we check the boards before we set the layout and sheet over them where the spacing will not work. The other local factor is wind. There is no lake and no river inside the city and no tree line worth the name across the cropland, so the gable ends take a straight hit. We anchor the rake trim accordingly. Owners who want a steeper look sometimes ask about luxury roofing on the farmhouse instead, which is a very different roof.

Residential exterior work by Orange Exteriors, roofing contractor serving Norwood Young America, MN

Metal Roofing in Norwood Young America

Why metal suits the roofs in this town

  • Long runs with no lap

    A panel that goes peak to eave in one piece has no horizontal seam anywhere in the field. On a roof this shape, that is most of the water risk gone before the first clip is set.

  • Clips that land in solid wood

    Board sheathing with gaps under it will not hold a clip. We check the deck as it comes open and sheet over the sections where the old boards will not take a fastener properly.

  • Rake trim anchored for field wind

    The census counts all two and a half square miles of this city as land. Wind crosses the cropland and hits the gable ends square, so the rake is where we tighten the fastening.

  • Permits handled over the counter

    The city runs its inspections and permit reviews through an outside firm and lists residential roofing among the permits it can process same day. That usually means no waiting to start.

  • A roof that suits a farm building

    Standing seam has been on barns and machine sheds around this county for generations. On a farmhouse gable it does not read as an experiment, it reads as what has always been up there.

  • One color across house and shed

    Most lots here have a garage or an outbuilding sitting a few steps from the house. Matching panel and trim across both, out of the same run of material, costs less than doing them apart.

How we run a small town reroof

  • We quote for what we may find

    On an older house we write the sheathing question into the quote before we start, so the number you are looking at already accounts for what may be under the shingles.

  • We work with the neighbors in mind

    Houses here sit close together. We keep the tear-off contained, the trailer out of the street where we can, and the yard clean before we leave for the night.

  • We answer at any hour

    We are open around the clock, seven days a week. Wind out here can open a gable end at two in the morning, and that is exactly when a call needs to be picked up.

  • We are used to older houses

    Farmhouse framing does what it wants after a century. We expect uneven rafters and a wavy ridge, and we lay the panel out to hide it rather than pretending it is not there.

  • We show up when we say

    Out here a crew that does not turn up costs you a whole week of weather. We schedule what we can actually staff, and we call you if the forecast moves the date.

Metal Roofing by Orange Exteriors, serving Norwood Young America, MN

What people near Norwood Young America say

  • We live in Eden Prairie. Orange did an excellent job on our siding replacement and provided great customer service all the way through.
    Thomas DeSutterSiding replacement, Eden Prairie, MN
  • Fantastic guys to work with, did an excellent job of fixing our siding. You can tell it’s a high integrity company. Definitely recommend.
    Carolyn MillerSiding repair
  • The crew arrived early and spread tarps all around the house to capture every bit of debris. By 3:00 PM, my entire roof was completely finished.
    Hazel JamesRoof replacement, Minneapolis, MN

Metal roofing questions in Norwood Young America

What people in Norwood Young America ask us about this work. If yours is not covered, call and ask.

Can my old farmhouse deck take a standing seam roof?

Usually, once we look at it. Board sheathing from that era runs one by six or one by eight with gaps between the boards, and a clip needs solid wood to bite into. Where the spacing is wrong or a board has gone soft, we sheet over the deck first. That is a line on the quote, not a surprise on day two.

Does a standing seam roof need extra paperwork in Norwood Young America?

It is the same residential roofing permit the city already handles through its outside review firm, so the timeline does not change. What metal adds is documentation: the inspector will want the panel gauge and the fastening schedule on file, along with the wind rating for the profile. We assemble that with the application rather than sending you to chase it.

Does wind off the fields around Norwood Young America damage metal roofs?

Wind is what metal is good at, provided the edges are right. There is no exposed fastener to work loose and no shingle tab to lift. What fails on an open site is edge metal, so we anchor the rake and eave trim tighter than the field and hem the panel into the drip edge instead of leaving it loose.

Ask what standing seam looks like here

Give us the address and we will measure the roof, look at the deck where we can, and put a written standing seam quote in your hands. No charge and no obligation.

Get Your Free Exterior Estimate

Tell us what is going on with your roof, siding, windows, or gutters. We will take a look and give you a straight answer, including when the answer is that you can wait.

Request your estimate

Rated 5.0 from 217 Google reviews

No obligation. We typically reply within a few hours.